1.4
CONNECTING TO THE NETWORK
Figure 1-2
depicts a typical configuration for the SWPIM-DDS.
Cabletron Systems part number for the cable is 9360119-x, where x
represents the length of the cable.
SSR-600
1.5
COMPLETING THE INSTALLATION
After installing the SWPIM-DDS, the SWPIM-DDS will need to be
configured for the network. Refer to the host platform software
documentation in order to set up and manage the SWPIM-DDS using the
software.
SWPIM-DDS Installation Guide
Site 1
SWPIM-DDS
Figure 1-2 Typical Configuration
Connecting to the Network
WAN Cloud
Site 2
SSR-600
SWPIM-DDS
1-5