Appendix A: Specifications; Dfe Module Specifications; 7H4385-49 Specifications; A-1 7H4385-49 Specifications - Enterasys MATRIX 7H4385-49 Hardware Installation Manual

This appendix provides information about the following:
For information about...

DFE Module Specifications

COM Port Pinout Assignments
Regulatory Compliance
Enterasys Networks reserves the right to change the specifications at any time without
notice.
DFE Module Specifications
Table
environmental module specifications for the 7H4385‐49 DFE module.
Table A-1 7H4385-49 Specifications
Item
Ports 1 through 48
Option Slot
Optional Power Input
Processors/Memory
Processor
Dynamic Random Access Memory
(DRAM)
FLASH Memory
A‐1 provides the Input/Output ports, processors and memory, physical, and
Specification
Forty-eight, 10BASE-T/100BASE-TX ports by way of RJ45
connectors. These ports also support PoE operation.
Supports one optional NEM.
48 Vdc, 20 A Maximum power input connection from an
Enterasys Matrix N-POE Power System.
MPC750CX, 400 MHz processor
256 MB
32 MB
‡FE-Platinum Series Hardware Installation Guide A-1
A
Specifications
Refer to page...
A-1
A-2
A-3