Appendix A: Specifications; Switch Specifications; Console Port Pinout Assignments; B5 Switch Specifications - Enterasys B5G124-24 Hardware Installation Manual

This appendix provides the following information:
For information about...

Switch Specifications

RPS Specifications
Torque Values
Pluggable Transceiver Specifications

Console Port Pinout Assignments

Regulatory Compliance
Enterasys Networks reserves the right to change specifications at any time without notice.
Switch Specifications
Table A‐1 provides the I/O ports, processors and memory, physical, and environmental
specifications for the B5 models.
Table A-1 B5 Switch Specifications
Item
B5G124-24 and B5G124-24P2
RJ45 ports 1 through 24
Combo SFP ports 23 through 26
B5G124-48 and B5G124-48P2
RJ45 ports 1 through 48
Specification
Twenty-four 10BASE-T/100BASE-TX/1000BASE-T
compliant ports with auto-sensing and auto-negotiation via
RJ45 connectors. These ports also support 802.3at and
802.3af PoE connections on the B5G124-24P2.
Four ports that support optional pluggable transceiver
100BASE-FX, 1000BASE-SX, 1000BASE-LX, and
1000BASE-TX fiber-optic connections.
When an SFP transceiver in SFP port 23 establishes a link,
RJ45 port 23 is disabled. When an SFP transceiver in SFP
port 24 establishes a link, RJ45 port 24 is disabled.
Forty-eight 10BASE-T/100BASE-TX/1000BASE-T compliant
ports with auto-sensing and auto-negotiation via RJ45
connectors. These ports also support 802.3at and 802.3af
PoE connections on the B5G124-48P2.
Enterasys B5 Gigabit Ethernet Switch Hardware Installation Guide A-1
A
Specifications
Refer to page...
A-1
A-5
A-9
A-9
A-9
A-9