Specifications; Peristaltic Pumps 1Vs And 8Vs - Agilent Technologies 8453 User Manual, Installing And Operating Manual

Specifications

Peristaltic Pumps 1VS and 8VS

The peristaltic pumps 1VS and 8VS are for one and eight pumping channels.
The pumps are designed for liquid samples. Due to the peristaltic pump
principle only the tubing is in contact with the liquid.
The pumps can be operated manually and remotely via a digital interface. If
used for automated sampling in the dissolution testing application, only the
remote operation is applied.
Connect the pump 1VS to the valve-pump-controller only by the controller-to-pump cable
N O T E
(PN G1103-61612) provided by Agilent.
Connect the pump 8VS to the 8453 spectrophotometer only by the GPIO-to-pump cable
(PN G1103-61607) provided by Agilent
Table 1
Type
Dimensions
Weight
Line voltage
Line frequency
Power consumption
Ambient operating temperature
Agilent 8453 Dissolution Testing System Installing and Operating Manual
Physical Specifications Peristaltic Pumps 1VS and 8VS
Site Requirements and Specifications
Specification
15.9 cm (6.2 inches) wide
19.3 cm (7.6 inches) deep
11.2 cm (4.4 inches) high
15.9 cm (6.2 inches) wide
26.5 cm (10.5 inches) deep
11.2 cm (4.4 inches) high
3.25 kg (7.2 lbs)
3.3 kg (7.3 lbs)
100–120 V AC ± 10%
220–240 V AC ± 10%
50–60 Hz
55 VA
5–40 °C (41–104 °F)
1
Specifications
Comments
Pump 1VS
Pump 8VS
Pump 1VS
Pump 8VS
Select 115 V AC
Select 230 V AC
Maximum
15