Agilent Technologies 8453 User Manual, Installing And Operating Manual page 71

line power switch
three-position
control switch
pressure-wheel
assembly
Figure 28
The pressure-wheel assembly for the tubing-cassettes is on the front of the
pump.
Do not touch the pressure-wheel assembly when it is turning. Your fingers may
WA R N I N G
become trapped.
The safety symbol indicates a potential hazard to the user and pump during
operation.
!
Cable Connectors
The rear panel has a power socket, a remote cable connector, a line voltage
selector, and a fan outlet. See
Agilent 8453 Dissolution Testing System Installing and Operating Manual
Front View of the Pump
Figure
Using the Peristaltic Pumps 1VS and 8VS
Installing Your Pump
29.
3
flow control switch
safety symbol
71