Connecting Multicell System Tubing - Agilent Technologies 8453 User Manual, Installing And Operating Manual

Connecting Multicell System Tubing

You use the multicell transport in the Agilent 8453 spectrophotometer with
the peristaltic pump 8VS. The direction of flow for your samples is from the
dissolution vessels via the flow cells in the multicell transport holder through
the pump tubing returning to the bath.
Connects flow cell to
pump (1.0 m)
Connects dissolution
probe to flow cell
(2.0 m)
Connects vessel to
pump (2.0 m)
Figure 5
The tubing in the multicell tubing kit have colored heat-shrunk sheaths. You
identify the different tubing by the colored heat-shrunk sheaths and the
length. There are eight pieces of each different tubing. Match the colors of the
fittings so that each tubing line has the same colors on all the fittings, see
Table 8
1 Insert the flow cells into the multicell transport in the Agilent 8453
Agilent 8453 Dissolution Testing System Installing and Operating Manual
Multicell Tubing Kit
on page 24.
spectrophotometer.
Installing a Multicell-transport-based Sampling System
Setting Up 2
31