2
Setting Up
Installing a Multicell-transport-based Sampling System
Stage 3: Installing the Tubing Cassette
1 Put the tubing cassette on the pressure-wheel assembly by placing the
Figure 3
2 Press the cassette down to lock the right side onto the locking-bar.
Figure 4
3 Repeat for each of the cassettes.
More detailed information on using the pump can be found in
"Using the Peristaltic Pumps 1VS and 8VS".
30
cassette on the mounting pivot, see
Placing Tubing-Cassette
Tubing-Cassette in Position
Agilent 8453 Dissolution Testing System Installing and Operating Manual
Figure
3).
!
Chapter
3,