Agilent Technologies 8453 User Manual, Installing And Operating Manual page 32

2 Setting Up
Installing a Multicell-transport-based Sampling System
2 Connect the flow cell to the pump, see
Tubing to outlet on flow cell
Colored heat-shrunk
sheath on tubing
Fitting
Conical adaptor
Pump tubing
Figure 6
32
with the short cell fitting to the outlet of the flow cell, and the colored
fitting to a union. Connect the conical adapter to the union. Insert a conical
adapter into the pump tubing on the inlet side of the pump.
Connecting Flow Cell to Pump
Agilent 8453 Dissolution Testing System Installing and Operating Manual
Figure 6—connect the 1.0 m tubing