Table of Contents
Advertisement
Installation
Fig.: Install compact module
6.3
Install/uninstall connector
We recommend that the connectors with spring-loaded terminals are wired before they are
plugged in.
Please note:
}
All contacts should be protected from contamination.
}
The mechanics of the connector are designed for 25 plug in/out cycles.
Installation procedure:
}
Plug the connector into the required connector strip until you hear it lock into position [1].
Operating Manual PSSu K F FAU B, PSSu K F FAU P
1003434-EN-05
NOTICE
Potential contact damage due to twisting!
The contacts for the Module Supply and Periphery Supply can be bent by
twisting the compact modules on the mounting rail.
– On the mounting rail, carefully slide the compact module to the left, in
parallel to the adjoining module, until you hear the lateral mounting
hooks on the adjacent module lock into position [4].
| 51
Advertisement
Table of Contents
