Install/Uninstall Connector - Pilz PSSu K F EI Operating Manual

Installation
5.3

Install/uninstall connector

We recommend that the connectors with spring-loaded terminals are wired before they are
plugged in.
Please note:
}
All contacts should be protected from contamination.
}
The mechanics of the connector are designed for 25 plug in/out cycles.
Installation procedure:
}
Plug the connector into the required connector strip until it locks into position.
Uninstallation procedure:
}
Pull the connector on the connector housing upwards.
Operating Manual PSSu K F EI
1003303-EN-03
NOTICE
As you remove the connector, grasp the connector housing and not the
cable harness.
| 40