Safety Regulations; Use Of Qualified Personnel; Warranty And Liability - Pilz PSSu K F FAU B Operating Manual

Safety
3.2

Safety regulations

3.2.1

Use of qualified personnel

The products may only be assembled, installed, programmed, commissioned, operated,
maintained and decommissioned by competent persons.
A competent person is a qualified and knowledgeable person who, because of their train-
ing, experience and current professional activity, has the specialist knowledge required. To
be able to inspect, assess and operate devices, systems and machines, the person has to
be informed of the state of the art and the applicable national, European and international
laws, directives and standards.
It is the company's responsibility only to employ personnel who
}
Are familiar with the basic regulations concerning health and safety / accident prevention,
}
Have read and understood the information provided in the section entitled Safety
}
Have a good knowledge of the generic and specialist standards applicable to the specific
application.
3.2.2

Warranty and liability

All claims to warranty and liability will be rendered invalid if
} The product was used contrary to the purpose for which it is intended,
}
Damage can be attributed to not having followed the guidelines in the manual,
}
Operating personnel are not suitably qualified,
}
Any type of modification has been made (e.g. exchanging components on the PCB
boards, soldering work etc.).
Operating Manual PSSu K F FAU B, PSSu K F FAU P
1003434-EN-05
INFORMATION
Configuration of the muting end point is supported by the PSSu K F FAU P
from hardware version 2 and software version 1.1.
INFORMATION
Configuration of braking ramp monitoring is supported by the PSSu K F
FAU P from hardware version 3 and software version 2.0.
INFORMATION
Measurement mode is supported by the PSSu K F FAU B/P from hardware
version 3 and software version 2.2.
| 12