Pilz PSSu K F FAU B Operating Manual page 43

Function description
FW-UPDATE state
Users can transfer the PSENvip to the operating state "FW-Update" via the web interface
(see web interface: Settings -> Update). In this operating state the PSENvip firmware is
updated. PSENvip exits this operating state automatically when the update is either ex-
ecuted without error or is aborted with an error:
}
Firmware has been updated without error
PSENvip is reset automatically. PSENvip is rebooted with initialisation and self-test.
}
Firmware update is aborted with a major error
See ERROR state
In FW-UPDATE state, PSENvip will not process any requests.
Fig.: Request/exit FW-UPDATE state
Operating Manual PSSu K F FAU B, PSSu K F FAU P
1003434-EN-05
RUN
MEASUREMENT
STANDBY
HALT
Request FW-UPDATE
Request FW-UPDATE
Request FW-UPDATE
Request FW-UPDATE
FW-UPDATE
ERROR
OK
Reboot
Automatic reset
Automatic reset
| 43