Related Manuals for Pilz PNOZ m ES ETH
Summary of Contents for Pilz PNOZ m ES ETH
- Page 1 PNOZ m ES ETH Configurable, safe small controllers PNOZmulti 2 Operating Manual-1002700-EN-06...
- Page 2 Preface This document is the original document. All rights to this documentation are reserved by Pilz GmbH & Co. KG. Copies may be made for the user's internal purposes. Suggestions and comments for improving this documenta- tion will be gratefully received.
-
Page 3: Table Of Contents
6.4.3 Interface configuration ......................6.4.4 RJ45 connection cable ......................6.4.5 Process data exchange ......................Operation ..........................Messages ..........................Reset Ethernet connection settings ..................Tecnical details ........................Order reference ........................Product ............................. Accessories ..........................Operating Manual PNOZ m ES ETH 1002700-EN-06... -
Page 4: Introduction
Introduction Introduction Validity of documentation This documentation is valid for the product PNOZ m ES ETH. It is valid until new document- ation is published. This operating manual explains the function and operation, describes the installation and provides guidelines on how to connect the product. - Page 5 Introduction INFORMATION This gives advice on applications and provides information on special fea- tures. Operating Manual PNOZ m ES ETH 1002700-EN-06...
-
Page 6: Overview
Scope of supply Expansion module PNOZ m ES ETH Jumper Unit features Application of the product PNOZ m ES ETH: Communication module for connection to a base unit from the configurable control system PNOZmulti 2. The product has the following features:... -
Page 7: Front View
Overview Front view Legend: X1, X2: Ethernet interfaces LEDs: – Power – DHCP – L/A 1 (Link/‘Act 1) – L/A 2 (Link/Act 2) Operating Manual PNOZ m ES ETH 1002700-EN-06... -
Page 8: Safety
Safety circuits in accordance with VDE 0113 Part 1 and EN 60204-1 The expansion module may not be used for safety-related functions. The product PNOZ m ES ETH meets the requirements of the standards EN 81-20, EN 81-22 and EN 81-50, harmonised under the Lifts Directive 2014/33/EU, and the require- ments of the standard EN 115-1, harmonised under the Machinery Directive 2006/42/EC. -
Page 9: Safety Regulations
Do not open the housing or make any unauthorised modifications. Please make sure you shut down the supply voltage when performing maintenance work (e.g. exchanging contactors). Operating Manual PNOZ m ES ETH 1002700-EN-06... -
Page 10: Function Description
Function description Function description Unit properties The product PNOZ m ES ETH has two Ethernet interfaces to Download the project Read the diagnostic data Set virtual inputs for standard functions Read virtual outputs for standard functions via Ethernet (TCP/IP, Modbus/TCP). -
Page 11: Installation
Electrostatic discharge can damage components. Ensure against discharge before touching the product, e.g. by touching an earthed, conductive sur- face or by wearing an earthed armband. Dimensions in mm 22,5 101,4 (4,11“) (0,88“) Operating Manual PNOZ m ES ETH | 11 1002700-EN-06... -
Page 12: Connect The Base Unit And Expansion Modules
Please refer to the document "PNOZmulti System Expansion" for details of the number of modules that can be connected to the base unit and the module types. Operating Manual PNOZ m ES ETH | 12 1002700-EN-06... -
Page 13: Commissioning
Proceed as described in the operating manual for the base unit. NOTICE For the commissioning and after every user program change, you must check whether the safety devices are functioning correctly. Operating Manual PNOZ m ES ETH | 13 1002700-EN-06... -
Page 14: Ethernet Interfaces
Interface configuration RJ45 socket Standard Crossover 8-pin TD+ (Transmit+) RD+ (Receive+) TD- (Transmit-) RD- (Receive-) RD+ (Receive+) TD+ (Transmit+) n.c. n.c. n.c. n.c. RD- (Receive-) TD- (Transmit-) n.c. n.c. n.c. n.c. Operating Manual PNOZ m ES ETH | 14 1002700-EN-06... -
Page 15: Rj45 Connection Cable
Appropriate design measures should be used to ensure that the plug-in connection is insensitive to in- creased mechanical stress (e.g. through shock, vibration). Such measures include fixed routing with strain relief, for example. Operating Manual PNOZ m ES ETH | 15 1002700-EN-06... -
Page 16: Process Data Exchange
The RJ45 interfaces on the internal autosensing switch enable process data to be ex- changed with other Ethernet subscribers within a network. The product PNOZ m ES ETH can also be connected to Ethernet via a hub (hub or switch). Ethernet subscriber... -
Page 17: Operation
When the supply voltage is switched on, the PNOZmulti copies the configuration from the chip card. The safety system PNOZmulti is ready for operation when the "POWER" and "RUN" LEDs on the base unit and the "POWER" LED on the PNOZ m ES ETH are lit continuously. Messages Legend... -
Page 18: Tecnical Details
In accordance with the standard Condensation during operation Not permitted Max. operating height above sea level 2000 m EN 61131-2 Vibration In accordance with the standard EN 60068-2-6 10 - 150 Hz Frequency Acceleration Operating Manual PNOZ m ES ETH | 18 1002700-EN-06... - Page 19 Max. cable length per input Material Bottom Front Dimensions 101,4 mm Height Width 22,5 mm Depth 111 mm Weight 80 g Where standards are undated, the 2012-04 latest editions shall apply. Operating Manual PNOZ m ES ETH | 19 1002700-EN-06...
-
Page 20: Order Reference
Terminator, jumper Product type Features Order no. PNOZ mm0.xp connector left Jumper yellow/black to connect the modules, 10 779 260 piece RJ45 Connector 8-pin RJ45 male connector, straight, Cat 6a 380 401 Operating Manual PNOZ m ES ETH | 20 1002700-EN-06... - Page 21 Back cover Support Technical support is available from Pilz round the clock. Americas Australia Scandinavia +45 74436332 Brazil +61 3 95600621 +55 11 97569-2804 Spain Canada Europe +34 938497433 +1 888-315-PILZ (315-7459) Austria Switzerland Mexico +43 1 7986263-0 +41 62 88979-30...