Pilz PSSu K F FAU B Operating Manual page 52

Installation
Uninstallation procedure:
}
Push both locking levers to the left, as far as they will go [1].
Fig.: Install/uninstall connector
Operating Manual PSSu K F FAU B, PSSu K F FAU P
1003434-EN-05
INFORMATION
The two locking levers automatically hook into place when plugged in. As a
result the connector is firmly connected to the module.
INFORMATION
This will automatically lift the connector, which can then be removed from
the module.
NOTICE
As you remove the connector, grasp the connector housing and not the
cable harness.
| 52