AUMA SAV 07.2 Operation Instructions Manual page 63

SAV 07.2 SAV 16.2 / SARV 07.2
ACV 01.2 HART
Select main menu
Select parameter
Selection:
Log on user
Change value
SARV 16.2 Control unit: electronic (MWG)
Speed functions M1699
Speed internal1 M1930
Speed internal2 M1931
Speed internal3 M1932
Speed internal 4 M1933
Speed rem. min. M1936
Speed rem. max M1937
Default value: according to order data
Setting range: The adjustable speed range is indicated on the actuator name plate.
1. Set selector switch to position 0 (OFF).
2. Press push button C Setup and hold it down for approx. 3 seconds.
Display goes to main menu and indicates: ▶ Display
3. Select parameter either:
click via the menu
via direct display: Press
Display indicates: Speed internal1
4. Select via Up ▲ Down ▼:
▶ Speed internal1 M1930
▶ Speed internal2 M1931
▶ Speed internal3 M1932
▶ Speed internal 4 M1933
▶ Speed rem. min. M1936
▶ Speed rem. max M1937
The black triangle ▶ indicates the current selection.
5. Press Ok.
Display shows the set value.
The bottom row indicates: Edit Esc
6. Press Edit.
Display indicates:
- Specialist (4) → continue with step 7
- in bottom row Up ▲ Down ▼ Esc → continue with step 11
7. Use Up ▲ Down ▼ to select user:
Information: Required user level: Specialist (4) or higher
The symbols have the following meaning:
- black triangle: ▶ = current setting
- white triangle: ▷ = selection (not saved yet)
8. Press Ok.
Display indicates: Password 0***
9. Enter password (→ enter password).
Display shows the set value.
The bottom row indicates: Edit Esc
10. Press Edit.
11. Enter new value for speed via
Information: The adjustable speed range is shown in round brackets.
Commissioning (basic settings)
to parameter, or
and enter ID, e.g.: M1930.
Up ▲ Down ▼.
63