Safety Machine Accessories; Total Stop; Arm Cover - Bomar Ergonomic Series Operating Instructions Manual
Hide thumbs
Also See for Ergonomic Series:
- Operating instructions manual (82 pages) ,
- Operating instructions manual (189 pages) ,
- Operating instructions manual (86 pages)
Table of Contents
Advertisement
1.6.
Safety machine accessories
The machine is equipped with safety accessories. They protect the operator from
injuries and the machine from damage. The safety accessories are blocking
accessories, emergency switches and covers. Check the function of the safety
accessories once a week. If the safety accessories are not fulfilling their function,
stop your work and repair or change the safety accessories.
Enhanced risk!
Do not come into or intervene in the cutting area.
Otherwise, there is a possibility of heavy injury.
1.6.1.
Total Stop
TOTAL STOP button is used for emergency switching – off of the machine in a case
of defect or health hazard. By pressing the TOTAL STOP button the supply of the
electrical power is interrupted.
If any damages or fault appear, immediately press the TOTAL STOP button!
Release of the pressed button is possible by turning the upper part of the button.
1.6.2.
Arm cover
19
Advertisement
Table of Contents
