Table of Contents
Advertisement
Only qualified person can do the servicing and repairs. For parts changing, use only
parts, which are identical with the originals. Otherwise, there is possibility of health
hazard.
Use only recommended type of the hydraulic oils and oils and lubricants.
Do not remove or do not lock the limit switches or safety equipments! Any use of the
saw, accessories or machine parts other than that intended by the BOMAR, spol. s r.o.
company is not permitted.
The guarantee on this product will be afterward lost and BOMAR, spol. s r.o. takes no
responsibility for caused damages!
1.5.
Safety machine accessories
The machine is equipped with safety accessories. It protects the operator from injuries
and the machine before damage. The safety accessories are blocking accessories,
emergency switches and covers. Check once in a week the function of the safety
accessories. If the safety accessories are functionless, you must stop work and repair or
change the safety accessories.
Enhanced risk!
Do not come into or intervene in the cutting area.
Otherwise, there is possibility of heavy injury.
1.5.1.
TOTAL STOP button
If any damages or fault appears, immediately press TOTAL
STOP button!
TOTAL STOP button is used for emergency switching – off the machine in case defect
or health hazard. By pressing TOTAL STOP button is interrupted the supply of the
electrical power.
Release the pressing button is possible by twisting of the upper part of the button.
1.5.2.
Saw arm cover
The band saw is stated to the operation, when the cover is closed!
1.5.3.
Saw band cover
This protective cover envelops the saw band in the area from guiding cube to the arm.
Never switch the saw band on if this cover is not mounted!
1.5.4.
Koncový spínač pohonu pásu u stroje typu manual
Verze stroje typu Manual obsahuje koncový spínač pohonu pásu, který odpojí pohon
pilového pásu po dořezání materiálu a klesnutí ramene do spodní polohy.
13
Advertisement
Table of Contents
