Bomar Ergonomic Series Operating Instructions Manual page 4

1) 2) We:
that the following designated device based on its conception and construction as well as the design launched by us
meets the relevant basic safety requirements of the decrees of the government.
This statement applies exclusively to the machine device in conditions in which it was brought to the market. It does
not apply to parts subsequently added by the end user or to modifications performed subsequently by the end
user.
In the event of any device modification not approved by us this declaration shall lose its validity
Name:
Type :
Serial number:
Manufacturer
Product data
Determination:
Description:
Technical data:
Documentation:
Technical documentation for this machine device was elaborated in compliance with Government regulation no. 176/2008,
Annex 7, part A.
The device meets relevant requirements of the given directives:
The applied harmonized standards, National standards and technical specifications:
ČSN EN ISO 12100:2011
ČSN EN 55011 ed.3+A1:2011
The conformity judging was performed according to §12, par. 3, let. a), of the Law no. 22/1997 Coll. as amended.
The declaration of conformity was carried out in the cooperation with the
Prague 4 – Czech Republic, Identification number: 63987121 - Inspection body no. 4002.
The inspection certificate no 07.801.283
Point of issue, datum
1) Name, address and identification number of the subject issuing the conformity declaration (producer of importer)
2) Person authorized to complete the technical documentation
3) The authorized or accredited body co-operating on the conformity judging
4
Band Saw
Ergonomic 340.275 DG
BOMAR, spol. s r.o., Těžební 1236/1, 627 00 Brno
for cross dividing and cutting of rolled and towed bars and profiles made of steel, stainless
steel, non-ferrous metals and plastics
Stand, table, cutting unit with the saw band and drive, clamping device, cooling
system, el. switch board with control panel.
Pneumatic NO
Cutting rate
Cutting angle
Total dimensions in mm (l×w×h)
Supply voltage
Total power requirement
Weight
The product is safe on condition of the common and determined usage.
Brno,.31.08..2015
EC Declaration of Conformity
BOMAR, spol. s r.o.
Těžební 1236/1
627 00 Brno, Czech Republic
Id. No: 48908827
declare herewith
YES Hydraulic NO
20-120 m.min
-45°- to -60°
1960x1570x1770 mm
400 V TN-C-S, 400 V TN-C, 230 V TN-C
1,7 kW
372 kg
ČSN EN 13898+A1:2009
ČSN EN 61000-6-2 ed.3:2006
was issued
YES Control system NO
-1
2006/42/EC
2004/108/EC
ČSN EN ISO 13857:2008
ČSN EN 60204 -1 ed.2+A1:2009
ČSN EN 61000-6-4 ed.2+A1:2011
3)
TÜV SÜD Czech s.r.o, Novodvorská 994, 142 21
Alfred Pichlmann, Managing Director
Name and function of the responsible
subject, signature
Manual version: 1.03/ May 2016
Manual rev.: 1
YES