4.8.
Worn pieces replacement
4.8.1.
Hard metal guides replacement
If the hard metal guides cannot be adjusted, they have to be replaced.
1.
Remove the cooling agent hosepipe and dismantle the saw band and saw
band guiding cube.
2.
Fasten the guiding cube in a vice.
3.
Loosen the mounting screws using a hex key
4.
Unscrew the frontal screws, which hold the hard metal guides.
5.
Now insert new hard metal guides and fasten them tightly and mount the
guiding cube to the guiding lath.
Attention:
The vice has to have aluminium jaws or an aluminium
insert to protect the pivot from damage.
6.
Install the saw band and adjust guiding cube and hard metal guides.
79