The guarantee on this product will be afterward lost and BOMAR, spol. s r.o. takes no
responsibility for caused damages!
Attention!
Only a qualified professional can carry out the servicing and
repairs of the electric equipment! Take special care during the
work with electrical equipment. High voltage shock can have
fatal consequences! Always keep notes about work safety!
Otherwise, there is possibility of heavy injury.
Do not start the machine, if the covers are not on their places!
1.5.
Safety machine accessories
The machine is equipped with safety accessories. It protects the operator from injuries
and the machine before damage. The safety accessories are blocking accessories,
emergency switches and covers. Check once in a week the function of the safety
accessories. If the safety accessories are functionless, you must stop work and repair or
change the safety accessories.
Enhanced risk!
Do not come into or intervene in the cutting area.
Otherwise, there is possibility of heavy injury.
1.5.1.
TOTAL STOP button
TOTAL STOP button is used for emergency switching – off the machine in case defect
or health hazard. By pressing TOTAL STOP button is interrupted the supply of the
electrical power.
If any damages or fault appears, immediately press TOTAL
STOP button!
Release the pressing button is possible by twisting of the upper part of the button.
1.5.2.
Saw arm cover
The band saw is stated to the operation, when the cover is closed!
1.5.3.
Saw band cover
This protective cover envelops the saw band in the area from guiding cube to the arm.
Never switch the saw band on if this cover is not mounted!
11