Machine Installing And Leveling; Machine Disposal After Lifetime - Bomar Ergonomic Series Operating Instructions Manual

2.6.4.
2.6.5.
38

Machine installing and leveling

Check the floor supporting capacity before installing the machine. If the floor
capacity does not meet the requirements, you must ready the necessary base for
the machine.
Minimal requirement:
machine weight –
Ergonomic 340.278 DG – 372 kg
+ weight of the accessories
+ maximum weight of material
The machine must be leveled in a horizontal position. All feet of the machine

must touch the floor after leveling.
The machine must be leveled by means of a calibrated spirit level. Put the spirit

level near the vice. Adjust the roller conveyors according to the spirit level.
For machine leveling, take care that there is sufficient space available for

operation, repair work, servicing of the machine and handling of the material.
The machine and all appended parts and accessories must be visible from the

place of operation.

Machine disposal after lifetime

Pour all service fluids (cooling liquid, hydraulic oil) from the machine over into
designated reservoirs. Dismantle machine into separate parts and dispose of them
in accordance with valid directives.
Manual version: 1.03/ May 2016
Manual rev.: 1