Driving Wheel Replacement - Bomar Ergonomic Series Operating Instructions Manual
Hide thumbs
Also See for Ergonomic Series:
- Operating instructions manual (82 pages) ,
- Operating instructions manual (189 pages) ,
- Operating instructions manual (86 pages)
Table of Contents
Advertisement
4.8.5.
Driving wheel replacement
1.
Dismantle the saw band.
2.
Screw of the fastening screw of the driving wheel and pull off the washer.
3.
Screw on the auxiliary screw to the driving shaft.
4.
Install the three-leg puller on the driving wheel and pull off it from the shaft.
5.
Check, if the spring and the driving shaft are not damaged. Contact your
supplier for parts replacement.
6.
If the shaft and the feather are in good order, clean them, oil them and install
them on the driving shaft.
85
Advertisement
Table of Contents
