Standards Covered By Amp 200N Series; General - Ametek AMP 200N Manual For Operation

AMETEK CTS
2

Standards covered by AMP 200N Series

The AMP 200 is special designed for testing the following standards.
ISO 11452-8
SAE J1113-2
Daimler Chrysler DC 10614-15
Fiat 9.90110 Rev.13 (2007-03)
GMW3097
PSA/Renault EQ/IR 02
VW TL 82566
Mercedes MBN 10284-2
Nissan 28401 NDS 02 Rev.4
GLoyd GL VI-7-2
Automotive
ISO 11452-8
SAE J1113-2
Daimler Chrysler DC10614
Daimler Chrysler DC11224
Daimler Chrysler DC10615 Rev D
Fiat 7_Z0450_2004
Fiat 9.90110 Rev.13 (2007-03)
Ford EMC CS 2009 RI140
Ford EMC CS 2009 RI150
Ford EMC CS 2009 CI250
GMW3097
PSA EQ/IR 02
Renault EQ/IR 02
VW TL 82566
MAN M3285
Mercedes MBN 10284-2
Nissan 28401 NDS 02 Rev.4
Volvo STD
Other
GLoyd GL VI-7-2
2.1

General

The AMP 200N series have been designed as a low-frequency signal source to generate sinusoidal signals used
to simulate ripple noise and ground shift noise as required by a variety of standards in the automotive industry
e.g. as per Ford, CI 210 and CI 250 as well as RI 150. The AMP 200N is controlled by the EM TEST Autowave to
also allow the generation of non-sinusoidal and customized signals. Additionally, the AMP 200N can be used to
generate magnetic fields by means of a radiation loop or small Helmholtz coils as per RI 140 of Ford EMC-CS-
2009.1 and Ford FMC 1278.
Manual for Operation
external/internal Magnetic Fields
Voltage Ripple Test, Closed loop / Substitution
Magnetic field Rev B
Magnetic field
Supply voltage ripple
Magnetic field
Magnetic field
Coupled Immunity
Coupled Immunity
Immunity to Ground Voltage Offset
Magnetic fields
Magnetic fields
Magnetic fields
Magnetic fields
Magnetic fields
Magnetic fields
Magnetic fields
Magnetic fields
Voltage Ripple test
V 4.0.3
AMP 200N series
8 / 60