Ametek AMP 200N Manual For Operation page 36

AMETEK CTS
Test characteristics
Method:
Coupling Method :
Test Regulation Method:
Diagram Unit
Tolerances
Tolerances :
Additional Settings:
Additional Level Offset
Level Change at next Testpoint:
User Software settings for adapt the hardware
The user has to complete the test settings with his individual used coupling and measuring devices. New
coupling devices can be installed in the menu Setup/Coupling Device by the user.
Coupling
Coupling Type
Coupling Device
A: Coupling Device:
Selectable 120mm Radiating Loop or a Helmholtz Coil from default list:
Radiating Loop
Radiating Loop (RL 120)
Solar 9230-1
ETS Lindgreen 6703
Schwarzbeck FESP 5132
Helmholtz Coils
Not available
Setup for add or modify new Antennas in the Library in the Setup Coupling Devices
 For more information refer to the Autowave software manual.
Manual for Operation
Default settings as per Standard
Radiated
Magnetic field (Calculation)
X-Axis : kHz ; Log
Y-Axis: dBpT
+10% -0%
0V
-3dB
Antenna
Radiating Loop
V 4.0.3
AMP 200N series
36 / 60