Immunity To Sae J1113-2 - Ametek AMP 200N Manual For Operation

AMETEK CTS
User Software settings
The user has to complete the test settings with his individual used coupling and measuring devices.
New coupling devices can be installed in the menu Setup/Coupling Device by the user.
A: Voltage Measuring Instrument:
The software needs no measuring instrument for control. The User has to measure himself the output voltage
and to calculate the Coupling Factor for correct voltage setting.
Attention:
ATTENTION
12.5

Immunity to SAE J1113-2

Default test setup continuous interference
Manual for Operation
According to a Ford statement this test will be replaced by a 100kHz sinus burst with
100us duration in the next Ford EMC-CS 2009.2 release. This release is planned to
be published in the begin of 2010.
V 4.0.3
AMP 200N series
47 / 60