Ametek AMP 200N Manual For Operation page 51

AMETEK CTS
Test characteristics for GL VI-7-2-20 (DC) continuous interference
Vector 1:
Name :
Start:
Stop :
Step
Method:
Coupling Method :
Test Regulation Method:
Disturbance Current limit : 1 A or setted value
Diagram Unit
Tolerances
Tolerances :
Additional Settings (Closed Loop with Scope only)
Level Change at next Testpoint:
Couplings
Coupling Type
Coupling Device
User Software settings
The user has to complete the test settings with his individual used coupling and measuring devices.
New coupling devices can be installed in the menu Setup/Coupling Device by the user.
A: Voltage Measuring Instrument:
Measurement Instrument
Scope
Instrument Value
B: Measuring Equipment (voltage probe):
Equipment Type
Equipment
Manual for Operation
Vector 1
Level: 3V Frequency 0.05Hz
Level: 3V Frequency 10.kHz
Type: Percentage
Value: 1%
Conducted
Voltage Level (Closed Loop)
X-Axis : kHz ; Log
Y-Axis: V; linear
positive +5%
negative -5%
-6dB
Coupling Network
EM TEST CN 200N
Measuring AC voltage ( rms)
Mandatory in GL standard
Voltage RMS value
Voltage Probe
LeCroy HFP 2500 10:1
V 4.0.3
AMP 200N series
51 / 60