Appendix; Declaration Of Ce-Conformity - Ametek AMP 200N Manual For Operation

AMETEK CTS

14 Appendix

14.1

Declaration of CE-Conformity

Manufacturer:
Address:
declares, that under is sole responsibility, the product's listed below, including all their options, are conformity with the
applicable CE directives listed below using the relevant section of the following EC standards and other normative
documents.
Product's name:
Low Voltage Directive 2014/35/EU
Standard to which conformity is declared:
EN 61010-1:2011
EMC Directive 2014/30/EU
Standard(s) to which conformity is declared:
EN 61326-1:2013
EN 61000-3-2:2014
EN 61000-3-3:2013
The purpose of this instrument is the generation of defined interferences signals for EMI immunity testing.
Depending on the arrangement of the test rig, the configuration, the cabling and the properties of the EUT itself, a
significant amount of electromagnetic radiation may result that could also affect other equipment and systems.
The user himself or herself is ultimately responsible for the correct and controlled operation of the rig. In case of
doubt, the tests should be carried out in a Faraday cage.
By
Place
Date
Manual for Operation
AMETEK CTS GmbH
Sternenhofstr. 15
CH 4153 Reinach BL1
Switzerland
AMP 200N Low frequency signal source DC to 250kHz
AMP 200N1.1 Low frequency signal source DC to 250kHz
AMP 200N2 Low frequency signal source DC to 500kHz
Safety requirements for electrical equipment for measurement, control, and
laboratory use.
Electrical equipment for measurement, control and laboratory use
(Requirements for devices to use in industrial area.)
Limits for harmonic current emissions
Limitation of voltage changes, voltage fluctuations and flicker in public low-
voltage supply systems.
Manufacturer
AMETEK CTS GmbH
Sternenhofstr. 15
CH 4153 Reinach
Tel: +41 61-7179191
Fax: +41 61-7179199
A. Burger
Business Manager Conducted EMC
Reinach BL, Switzerland
1. July 2017
V 3.04
AMP 200N series
59 / 60