General Information About Magnetic Immunity - Ametek AMP 200N Manual For Operation

AMETEK CTS
Current Measuring on Channel 2:
Measuring Instrument (AC current)
1. Instrument
2. Instrument value
Measuring Equipment
3. Equipment Type
4. Equipment
B: Current Measuring Instrument:
The current measuring is realized with a current probe connected to a measurement receiver. This instrument will
measure the transferred ac voltage. The selected AC current instrument must be able to measure up to 100kHz
Measurement Instrument
Scope
Keitley 2000
AMP200 Internal Internal
Connect Instrument
Press Connect for check the instrument connection.
Setup : for add or modify an instrument in the library
C: Measuring Equipment:
The current sensor is a current transformer or a shunt resistor probe connected to a measurement receiver. This
instrument will measure the transferred ac voltage. The selected AC current instrument must be able to measure
up to 100kHz.
Measurement Equipment
Current Probe
Current Shunt

12.4.2 General Information about Magnetic Immunity

Below is an overview of the field strength limits using various AMP 200N models.
Manual for Operation
Scope model
Voltage rms
Current Probe
Agilent N2783A
Measuring AC voltage
LeCroy preferred manufacturer by EM Test
Transform the current into a rms ac voltage
V 4.0.3
AMP 200N series
37 / 60