Ametek AMP 200N Manual For Operation page 17

AMETEK CTS
1 Framebus
2 Reference earth connection
3 Signal OUT
4 CH 1 IN
5 CH 2 IN
6 Offset OUT
8 Mains Fuse
Mains AMP 200N2
115 V 16 AT
230 V 10 AT
9 Safety Circuit
The Safety Circuit is a 12V loop who switches off the power supply of the amplifier. The ac voltage will be
interrupted by a relays.
Attention:
10 Mains Input
115VAC/230VAC 16A input connector (build in socket: IEC-60320 C20, compatible plug: IEC-60320 C19).
11 Mains Switch
After switch on the power LED is flashing few seconds, till the AMP200 is ready for use.
12 Mains selector
Selection of 115V / 230V
Manual for Operation
Figure 6
7
8
9
10
11
12
AMP 200N1.1 AMP 200N1
16 AT 2 x 8 AT
10 AT 2 x 4 AT
After open the Safety circuit there is still same energy in the storage capacitors
of the amplifier.
V 4.0.3
Ventilation
Mains Fuse
Safety Circuit
Mains input
Power on switch
Mains selector 115V / 230V
AMP 200N series
17 / 60