Table of Contents
Advertisement
CHASSIS
CHECKING THE FUEL PUMP OPERATION
1. Remove:
• driver seat
• passenger seat
• console
• right protector
2. Place a container under the end of the fuel
hose ①.
3. Check:
• fuel pump operation
a. Suck on the end of the vacuum hose.
4. Install:
• right protector
• console
• passenger seat
• driver seat
DISASSEMBLING OIL COOLING SYSTEM
Except the Cooling System of the engine, this
UTV is also equip the oil Cooling System.
Disassembly, Inspection and Assembly of Oil
Cooling System
1. Disassemble the oil cooler.
2. Disassemble the connecting steel oil pipe
3. Disassemble the connecting pressure resistance
rubber pipe.
CHECKING AND SERVICE THE OIL COOLING
SYSTEM
Check if the oil cooler is distortion and leak oil. To
adjust the distortion one, and welding the leak
one. If it can not solve, instead the oil cooler.
1. Check if the steel oil pipe is distortion and
leak. To adjust, instead the serious distortion
one and leak oil pipe
2. Check if Rubber Pipe is torn, aged, worn out
or distorted.
3. Check if the "O" rubber gasket ring which is
connect with the steel oil pipe and the oil
cooler is aging and damaged, instead the
aging and damaged one.
- 299-
Advertisement
Table of Contents
Troubleshooting
