Table of Contents
Advertisement
ENGINE
1、CHECK
1). Checking the clutch
• clutch housing ①
Heat damage/wear/damage
• one-way clutch bearing ②
Chafing/wear/damage
1NOTE:
• Replace the one-way clutch assembly and
clutch housing as a set.
• The one-way clutch bearing must be
installed with the flange side facing in.
a. Install the one-way clutch bearing and clutch
carrier assembly to the clutch housing and
hold the clutch carrier assembly.
b. When turning the clutch housing clockwise
(A), the clutch housing should turn freely. If
not, the one-way clutch assembly is faulty.
Replace it.
c. When turning the clutch housing counter-
clockwise (B), the clutch housing and crank-
shaft should be engaged.If not, the one-way
clutch assembly is faulty.
Replace it.
• clutch shoe
Heat damage
2、MEASURE
• clutch shoe thickness
Out of specification
Clutch shoe wear limit (a)
1.0 mm
- 172 -
Replace.
Replace.
Replace.
Replace.
Advertisement
Table of Contents
Troubleshooting
