Shop Supplies; Lubricants And Fluids; Engine Oils - Hisun HS700UTV-4 Maintenance Handbook

Hide thumbs Also See for HS700UTV-4:
Table of Contents

Advertisement

1.
Remove and install snap rings with snap rings pliers. Refer to Basic Tools in this chapter
2.
In some applications. it may be necessary to
replace snap rings after removing them
3.
Compress or expand snap rings only enough to
install them. If overly expanded. Lose their
retaining ability
4.
After installing a snap ring. Make sure it seats
completely
5.
Wear eye protection when removing and
installing snap rings

Lubricants and Fluids

Periodic lubrication help ensure a long service life for any type of equipment. Using the correct
type of lubricant is as important as performing the lubrication service. Although in an emergency the
wrong type is better than not using one, The following section describes the types of lubricants most
often required. Make sure to follow the manufacturer's recommendations for lubricant types

Engine oils

Engine oil for four-stroke the UTV engine use is classified by two standards: the American
Petroleum Institute (API) service classification. The Society of Automotive Engineers (SAE) viscosity
rating Standard classification
The API and SAE information is on all oil container labels. Two letters indicate the API service
classification. The number or sequence of numbers and letter (10W-40SG for example) is the oil's
viscosity rating. The API service classification and the SAE viscosity index are not indications of oil
quality.
The APL service classification standards, The first letter in the classification S indicates that the oil
is for gasoline engines. The second letter indicates the standard the oil satisfies .
The classifications are: MA (high friction applications) and MB( low frication applications).
Always use an oil with a classification recommended by the manufacturer, Using an oil with a
different classification can cause engine damage.
Viscosity is an indication of the oil's thickness. Thin oils have a lower number while thick oil have a
higher number. Engine oils fall into the 5-to50-weight range for single-grade oils.
GENERAL INFORMATION
SHOP SIPPLIES
NOTE1
Refer to Engine Oil and Filter in
Chapter Three for further information
on API, SAE classifications.
- 8 -

Advertisement

Table of Contents
loading

Table of Contents