Changing The Tail/Brake Light Bulb - Hisun HS700UTV-4 Maintenance Handbook

MAINTENANCE AND ADJUSTMENT OF THE UTV
• Close the hood.

CHANGING THE TAIL/BRAKE LIGHT BULB

1. Remove:
• cargo bed panel ①
• tail/brake light bulb holder (with bulb) ②
• bulb
NOTE:
Turn the bulb holder counterclockwise and
remove the defective bulb.
WARNING :
Keep flammable products and your hands
away from the bulb while it is on, since it will
be hot. Do not touch the bulb until it cools
down.
2. Install:
• bulb new
Secure the new bulb with the tail/brake light
bulb holder.
NOTE:
Avoid touching the glass part of the bulb.
Keep it free
transparency of the glass, life of the bulb, and
luminous flux will be adversely affected. If oil
gets on the bulb, thoroughly clean it with a
cloth moistened with alcohol or lacquer
thinner.
• tail/brake light bulb holder (with bulb)
• cargo bed panel
- 130-
from oil; otherwise, the