Table of Contents
Advertisement
CHASSIS
DISASSEMBLING THE FRONT BRIDGE
1. Take down the left and right front wheel parts.
2. Sequently remove the front disk brake clip,
cotter pin, open-groove nut, cushion and front
wheel hub.
3. Disassembly the left and right arm rocker and
cross steering knuckle.
4. Disassembly the differential device
5. Take down the front bridge from the frame
6. Emit the oil in the differential device
7. Pull out the left and right transmission shaft
from the differential device.
DISASSEMBLING THE UNIVERSAL JOINT
Remove
• universal joint
a. Remove the circlips
b. Place the universal joint in a press.
c. With a suitable diameter pipe
yoke
, press the bearing
③
shown.
d. Repeat the steps for the opposite bearing.
e. remove the yoke.
1NOTE:
It may be necessary to lightly tap the yoke
with a punch.
REMOVING
ASSEMBLY
Remove
• differential gear assembly
1NOTE:
The ring gear and the differential gear should
be fastened together. Do not disassemble the
differential gear assembly.
- 250-
.
①
ben
②
into the pipe as
④
THE
DIFFERENTIAL
eath the
GEAR
Advertisement
Table of Contents
Troubleshooting
