MAINTENANCE AND ADJUSTMENT OF THE UTV
WARNING
:
Check the operation of the brake after
bleeding the brake system.
ADJUSTING THE SELECT LEVER SHIFT ROD
① Neutral
② High
③ Low
④ Reverse
⑤ Select lever shift rod
⑥ Shift control cable
WARNING
:
Before shifting, you must stop the vehicle
and take your foot off the accelerator pedal.
Otherwise, the transmission may be
damaged
1. Adjust:
·Select lever shift rod
a. Make sure the select lever is in NEUTRAL.
b. Loosen both locknuts
WARNING
:
The select lever shift rod locknut (select lever
side) has left-handed threads. To loosen the
locknut, turn it clockwise.
c. Tighten the locknuts
ADJUSTING THE BRAKE LIGHT SWITCH
NOTE:
· The brake light switch is operated by
movement of the brake pedal.
·The brake light switch is properly adjusted
when the brake light comes on just before
the braking effect starts.
1 Check
·brake light operation timing
Incorrect
Adjust.
2. Adjust:
- 109-
.
①
.
①