Table of Contents
Advertisement
ENGINE
3). Checking the high wheel gear and middle
drive gear
• gear teeth
Blue discoloration/pitting/wear
• mated dogs
Rounded edges/cracks/missing portions
Replace.
• gear movement
Unsmooth
defective parts.
• circlip
Bends/looseness/damage
4). Checking the secondary shaft and driven
sprocket
• gear teeth
Blue discoloration/pitting/wear
• gear movement
Unsmooth
defective parts.
• circlip
Bends/looseness/damage
5). Checking the chain
• chain
Cracks/shift
shaft and driven sprocket as a set.
2、Measure:
• axle runout
Use a centering device and a dial gauge.
Out of specification
Drive axle runout limit
0.06 mm
- 188 -
Replace.
Repeat steps #1 or replace the
Replace.
Replace.
Repeat steps #1 or replace the
Replace.
Replace the chain, secondary
Replace the bent axle.
Advertisement
Table of Contents
Troubleshooting
