Hisun HS700UTV-4 Maintenance Handbook page 222

CHASSIS
CHECKING AND SERVICE THE STEERING
COLUMN PARTS
1. Check:
• steering column tube ①
• bearing ②
• central axis of the steering shaft ③
• spline ④
• loosening ⑤
• rocky ledge ⑥
The central axis of the steering shaft whether
flexible and moves. If does, dismantle and check
the axis, bearing and retaining ring whether ware
or damaged, according to the inspection
situation to instead the parts.
2. Check:
The two ends of the spline on the central axis
whether is wear out, if so, instead the central
axis.
3. Check:
The spline in the tow ends of the central axis
whether have wear, if dose, instead the central
axis.
4. Check:
The steering column tube and welding line of
the branch whether have crack and corrosion,
if it does, instead the steering column tube.
DIASSEMBLING THE STEERING DRIVE AXLE
1. Loose the clamp bolt in the cross gimbal,
internal spline on the top of the steering drive
axle, pull out the top of the steering drive axle.
2. Loose the clamp bolt in the cross gimbal,
spline on the bottom of the steering drive
axle, pull out the lower of the steering drive
axle.
- 209-