Checking The Front Brake Pads; Checking The Rear Brake Pads - Hisun HS700UTV-4 Maintenance Handbook

MAINTENANCE AND ADJUSTMENT OF THE UTV
NOTE:
Brake fluid may erode painted surfaces or
plastic parts. Always clean up spilled fluid
immediately.
WARNING :
· Use only the designed quality brake fluid:
otherwise,
deteriorate, causing leakage and poor
brake performance.
· Refill with the same type of brake fluid:
mixing fluids may result in a harmful
chemical reaction
performance.
· Be careful that water does not enter the
master cylinder when refilling. Water will
significantly lower the boiling point of the
fluid and may result in a vapor lock.
4. Close the hood.

CHECKING THE FRONT BRAKE PADS

1. Remove:
·front wheels
2. Check:
·brake pads
Wear indicator groove ○
Replace the brake pads as a set.
Refer to "FRONT AND REAR BRAKES" in
chapter 5.
Brake pad wear limit ○ a
1.5 mm (0.06 in)
3. Operate the brake pedal.
4. Install:
·front wheels

CHECKING THE REAR BRAKE PADS

1. Check:
·brake pads
Wear indicator groove ○
- 106-
the rubber seals
and lead to
almost disappeared
a
almost disappeared
a
may
poor