Compression Damping Force; Checking The Tires - Hisun HS700UTV-4 Maintenance Handbook

MAINTENANCE AND ADJUSTMENT OF THE UTV

Compression damping force

Turn the compression damping force adjusting
screw ① (use 3.0 allen wrench) in direction ⓐ to
increase the compression damping force and
thereby harden the damping, and in direction ⓑ
to decrease the compression damping force and
thereby soften the damping.
WARNING :
·Suspension
during operation.
compression damping force adjusting screw,
the rebound damping force adjusting screw
or the oil reservoir with your bare hand or
skin until suspension components have
cooled.
·Always adjust
assemblies on the left and right side to the
same setting. Uneven adjustment can cause
poor handling and loss of stability, which
could lead to an accident.

CHECKING THE TIRES

WARNING :
• TIRE CHARACTERISTICS
a. Tyre characteristics influence the handling
of vehicle's. If other tire combinations are
used, they can adversely affect your
vehicle's handling characteristics and are
therefore not recommended.
Front
Rear
• TIRE PRESSURE
a. Recommended tire pressure
Front 70Kpa
Rear 70KPa
b. Tyre pressure
specification could cause the tire to
dislodge from the rim under severe riding
conditions.
- 118-
components become
Never touch
the shock absorber
Size Type
6PR 25 × 8-12
6PR 25× 10-12
below the minimum
hot
the