Checking The Final Gear Oil Level; Changing The Final Gear Oil - Hisun HS700UTV-4 Maintenance Handbook

MAINTENANCE AND ADJUSTMENT OF THE UTV
·brake light operation timing
a. Hold the main body
so that it does not rotate and turn the adjusting
nut in direction
②
light comes on at the proper time.
○
Direction a
○
Direction b

CHECKING THE FINAL GEAR OIL LEVEL

1. Place the vehicle on a level surface.
2. Remove:
·oil filler plug ①
3. Check:
·oil level
Oil level should be up to the brim of the hole.
Oil level low
Recommended oil
SAE 80 API "GL-4" Hypoid gear oil
WARNING :
Take care not allow foreign material to enter
the final gear case.
4. Install:
·oil filler plug
23 Nm (2.3 m · kg, 17 ft · lb)

CHANGING THE FINAL GEAR OIL

1. Place the vehicle on a level surface.
2. Place a container under the final gear case to
collect the used oil.
3. Remove:
·oil filler plug ①
·Fill:
final gear cas
- 110-
of the brake light
①
○ ○
a or b until the brake
Brake light comes on sooner.
Brake light comes on later.
Add oil to the proper level.
switch