Checking The Wheels; Checking And Lubricating The Cables - Hisun HS700UTV-4 Maintenance Handbook

Hide thumbs Also See for HS700UTV-4:
Table of Contents

Advertisement

MAINTENANCE AND ADJUSTMENT OF THE UTV
• Set tire pressures when the tires are cold.
• Tire pressures must be equal in both front
tires and equal in both rear tires.
2. Check:
• tire surfaces
Wear/damage○
Tire wear limit ○
Front and rear: 3.0 mm (0.12 in)
WARNING
:
It is dangerous to ride with a worn-out tire.
When tire wear is out of specification, replace
the tire immediately.

CHECKING THE WHEELS

1. Check:
• Wheels ①
Damage/bends
NOTE:
Always balance the wheel when a tire or
wheel has been changed or replaced.
WARNING
:
• Never attempt even small repairs to the
wheel.
• Ride conservatively after installing a tire to
allow it to seat itself properly on the rim.
CHECKING
CABLES
WARNING
:
A
damaged
corrosion and interfere with the cable
movement. An unsafe condition may result
so replace a damaged cable as soon as
possible.
1. Check:
• cable sheath Damage
• cable operation Unsmooth operation
- 120-
Replace.
a
a
Replace.
AND
LUBRICATING
cable
sheath
may
Replace.
THE
cause

Advertisement

Table of Contents
loading

Table of Contents

Save PDF