Table of Contents
Advertisement
Professional mechanics can work for years and never sustain a serous injury or mishap. Follow
these guidelines and practice common sense to safely service the utility terrain venires
1.
Do not operate the utility terrain venires in an enclosed area venires The exhaust gasses contain
carbon monoxide. an odorless, colorless and tasteless poisonous gas. Carbon monoxide levels
build quickly in small enclosed areas and can cause unconsciousness and death in a short time.
Make sure to properly ventilate the work area or operate the UTV side
2.
Never use gasoline or any extremely flammable liquid to clean parts. Refer to cleaning parts and
handling Gasoline Safely in this section
3.
Never smoke or use a torch in the vicinity of flammable liquids, such as gasoline or cleaning
solvent.
4.
If welding or brazing on the UTV the fuel tank to a safe distance at least 50ft.(15m) away.
5.
Use the correct type and size of tools to avoid damaging fasteners.
6.
Keep tools clean and in good condition. Replace or repair worn or damaged equipment.
7.
When loosening a tight fastener, be guided by what would happen if the tool slips.
8.
When replacing fasteners, make sure the new fasteners are the same size and strength as the
original ones.
9.
Keep the work area clean and organized.
10.
Wear eye protection anytime the safety of the eyes is in question. This includes procedures that
involve drilling, grinding, hammering, compressed air and chemicals.
11.
Wear the correct clothing for the job. Tie up or cover long hair so it does not get caught in moving
equipment.
12.
Do not carry sharp tools in clothing pockets.
13.
Always have an approved fire extinguisher available. Make sure it is rated for gasoline (Class B)
and electrical (Class C) fires.
14.
Do not use compressed air to clean clothes, the UTV or the work area. Debris may be blown into
the eyes or skin. Never direct compressed air at anyone. Do not allow children to use or play with
any compressed air equipment.
15.
When using compressed air to dry rotating parts, hold the part so it does not rotate. Do not allow
the force of the air to spin the part. The air jet is capable of rotating parts at extreme speed. The
part may disintegrate of become damaged, causing serious injury.
16.
Do not inhale the dust created by brake pad and clutch wear. These particles may contain
asbestos. In addition, some types of insulating materials and gaskets may contain asbestos.
Inhaling asbestos particles is hazardous to one's health.
17.
Never work on the UTV while someone is working under it.
GENERAL INFORMATION
SAFETY
- 4 -
Advertisement
Table of Contents
Troubleshooting
