Safety Instructions - Hisun HS294-2 Owner's/Operator's Manual

All operators, including experienced vehicle
drivers or passengers, should carefully read and
fully understand this Users Manual, and operate
strictly as the manual states in order to achieve
the best performance and avoid accidents.
Everyone who uses your vehicle should be
trained on how to operate the vehicle and be
required to read this manual before operation.

1. Safety Instructions:

1. Understand this vehicle by reading this
manual and
components of the vehicle. Only start and
operate the vehicle after finishing reading this
manual.
2. Pay close attention to the warning and caution
labels on the vehicle
3. Understand completely and learn to use the
safety devices (roll-over protective structure,
seat belts), and never change original safety
devices. If safety devices are damaged,
consult your local dealer for replacement.
Always use seat belts.
Hitch coupling device
understanding all
12-16
4. Do not wear loosen articles of clothing during
operation, as these can be drawn into moving
parts on the vehicle and could cause a severe
injury to occur.
You should always wear protective equipment,
such as helmet, boots, eye protection, ear
protection, and gloves etc.
5. Only a qualified driver should operate this
vehicle. Never operate after drinking, using
drugs or controlled products, or while
fatigued.
6. Always perform the pre-operation checks as
following:
1) Check seat belt for worn or damaged, if
the
necessary, replace it.
2) Check brakes, throttle, brake pedal and
other mechanical parts for proper operation.
If you discover any irregularities, replace
related parts as necessary. Periodically
c h e c k t h e f i t t i n g s a n d f a s t e n e r s .
3) Check engine oil level and engine coolant
level.
4) Check that the vehicle is equipped to handle
the surroundings.
5) Check and keep vehicle clean. Sludge,
grease and debris can cause a fire and
severe injury.
7. Passenger quantity and loading:
1) Only the driver and one passenger inside