Table of Contents
Advertisement
Introduction HS 200UTV/HS 250UTV
■ Turn Signal Light Switch
[if equipped]
To indicate a right turn, push on the lower half
of the turn toggle switch.
To indicate a left turn, push on the upper half
of the turn toggle switch.
When the left or right signal is activated, the
indicated turning light will flash and the other
will stay on.
The indicator lamp at the instrument panel
also flashes indicating the direction of the turn.
NOTE:
The turn signal light switch is only
operative when the key switch is in the
"ON" position.
If the hazard light switch is pressed to the
"[a]" position while the turn signal is
activated, the indicated turning light will
flash and other will stay on.
Be sure to return switch to center position
after turning.
3. Checking the brake pedal.
■ Brake Pedal
CAUTION:
To avoid personal injury:
If the operator suddenly brakes, an
accident may occur due to loss of
control or the shifting forward of heavy
loads.
When driving on icy, wet or loose
surface, make sure the vehicle is
correctly loaded to avoid skidding or
loss of steering control. Reduce the
speed.
The brake pedal is the left pedal on the foot
board. Depress the pedal to slow or stop the
vehicle.
[1] Brake pedal
1-27
Advertisement
Table of Contents
