Checking The Brake; Pedal Stroke - Hisun HS 250UTV Owner's/Operator's Manual

Introduction HS 200UTV/HS 250UTV
■Checking Brake Pedal
CAUTION

Stop the engine and chock the wheels
before checking brake pedal.

If movement is outside of the specifications
contact your local dealer for adjusting the
brake.
◆Checking the brake pedal free travel
Proper brake pedal
free travel
1. Release the parking brake.
2. Slightly depress the brake pedal and
measure free travel at the top of the pedal
stroke.
3. If brake pedal free travel is outside of the
specifications, contact your local dealer for
adjusting the brake.
◆ Checking the brake pedal stroke
Less than 120mm(4.7in.)

Pedal stroke

1. Release the parking brake.
2. Step on the pedal and measure the pedal
stroke.
3. If brake pedal stroke is outside of the
specifications, contact your local dealer for
adjusting the brake.
7 to 14mm
(0.3 to in.)On the pedal
On the pedal
[1] Brake pedal
[2] "PEDAL STROKE"
■Checking Brake Hose and Lines
1. Check to see that brake hose and lines
are not swollen, hardened or cracked.
2. Check the brake hose and pipe joints for
oil leaks.
3. If there is any abnormality, consult your
local dealer for this service.
■Checking Brake Light Switch
1. Park the vehicle on a flat surface and
raise the cargo bed.
Turn the key switch to the "ON" position.
2.
3. Step on the brake pedal to check if the
brake light comes on.
4. If it does not, check the bulb or brake
light switch.
■Checking Radiator Hose and Clamp
Park the vehicle on a flat surface and raise
the
cargo bed. Check to see if radiator hoses are
properly fixed every 200 hours of operation or
six months, whichever comes first.
1-46