Bypass Adjustment - Regency Fireplace Products Greenfire GF950L Owners & Installation Manual

installation

Bypass Adjustment

BYPASS ADJUSTMENT (INLINE POWER FLUE)
IMPORTANT: Adjust the bypass plate before installing the inline power flue. Refer to the flueing section for your unit's bypass setting. Once the inline
power flue is installed and the flueing is connected, the bottom access panel to the bypass plate may not be accessible for further adjustment.
A bypass plate is used to adjust the flowrate of the exhaust being pulled from the unit. To adjust the bypass plate:
1. Remove the four screws on the bottom access panel.
2. Remove the two screws on the bypass plate and slide the plate to the
appropriate setting (refer to unit's flue chart).
3. Reinstall the bypass plate screws.
50
920-235
3. Reinstall bottom access panel screws.
1
GF950PV
Regency GF950L-2 Gas Fireplace
03.24.20