Gas Power Flue Installation - Framing Inline Power Flue Terminations - Regency Fireplace Products Greenfire GF950L Owners & Installation Manual

CV72EPV / CB72EPV
Inline Power Vent Vertical or Hortizontal Installation Instructions
installation
GAS POWER FLUE INSTALLATION - FRAMING
Gas Power Flue Installation - Framing
INLINE POWER FLUE TERMINATIONS
Inline Power Flue Terminations
• The inline power flue can be mounted directly onto a wall, ceiling, stud or truss. Additional supports can be built to support the power flue if
needed.
• The inline power flue can be oriented in any way if the access panel is accessible.
NOTE: The inline power flue will have a directional arrow which must be pointed away from the appliance.
Termination
End
406mm
Appliance
Appliance
End
Diagram 1: Inline
power flue oriented
vertically
NOTE: If the power vent is terminated vertically, no action
is required for the pressure switch. If in a horizontal
position, the pressure switch will need to be rotated. See
instructions on next page.
52
920-210
254mm
Directional
Arrows
End
Diagram 2: Inline power
flue oriented horizontally
IMPORTANT: The pressure switch must be oriented as shown
below:
Termination
End
Flue at appliance end
Pressure switch orientation if inline power
flue is oriented horizontally (see Diagram 2)
8
Flue at appliance
end
Pressure switch orientation if inline
power flue is oriented vertically (see
Diagram 1)
Regency GF950L-2 Gas Fireplace
02.20.20