Gas Power Flue Installation Clearance Requirements Inline Power Flue Terminations - Regency Fireplace Products Greenfire GF950L Owners & Installation Manual

CV72EPV / CB72EPV
Inline Power Vent Vertical or Hortizontal Installation Instructions
installation
GAS POWER FLUE INSTALLATION CLEARANCE REQUIREMENTS
Gas Power Flue Installation Clearance Requirements
INLINE POWER FLUE TERMINATIONS
Inline Power Flue Terminations
Confined spaces (chase, closet, attic, behind a wall):
• 76mm clearance is required on top of the power flue in a horizontal configuration (Diagram 2).
• 51mm clearance is required on the sides and bottom in a horizontal configuration (Diagram 2).
• 305mm clearance is required from the ends of the power flue in a horizontal configuration (Diagram 1).
• 51mm clearance is required on sides in a vertical configuration (Diagram 2).
• 305mm clearance is required on ends in a vertical configuration (Diagram 1).
• A framed access hole with dimensions of 305mm x 406mm is required to access the access panel if the inline power flue is placed behind a
wall (Diagram 3).
• The access hole can be covered with an open-air louver cover which allows 50% open air.
• The power flue must be installed where it can be easily accessed for servicing. An access hole as noted below, or an attic space, would be
suitable.
305mm
406mm
Diagram 3
920-210
54
305mm
Diagram 1
51mm
Diagram 2
Diagram 4
10
51mm
02.20.20
Regency GF950L-2 Gas Fireplace