installation
FRONT TRIM REMOVAL / INSTALLATION
1. Remove faceplate, inner door frame, and glass door if already installed - see instructions in this manual.
2. Remove two (2) screws in locations shown below to remove front trim piece.
3. Reverse steps to reinstall.
Front Trim Piece
INNER PANEL REMOVAL / INSTALLATION
1. Remove burner side panels by lifting them up and out.
2. Remove front trim piece - see instructions above.
3. Remove two (2) screws in locations shown below to release panel clips.
Panel Clip Screw
72
Diagram 1 - Front Trim Screw Locations
Locations
Panel Clip
4. Remove panels by sliding out.
5. Reverse steps to reinstall.
Regency GF950L-2 Gas Fireplace