Operation; Operating And Display Elements; Operating Elements - Lonza PyroTec PRO Hardware User Manual

Unpacking To unpack the PyroTec™ PRO, follow the instructions for packing in reverse order.
Note: Lonza recommends keeping the original packaging for future transport or storage of
the PyroTec™ PRO.
The packaging has been carefully designed to prevent damage to the instrument or its
parts.

8 Operation

Purpose of This chapter explains the operating elements and possible operating modes. It gives in-
This Chapter structions on how to operate the PyroTec™ PRO properly and safely.

8.1 Operating and Display Elements

8.1.1 Operating Elements

Apart from the power ON/OFF switch and the pause button there are no specific operating
elements on the PyroTec™ PRO instrument.
The power ON/OFF switch is located at the instrument's lower right corner. A status light
in the switch indicates if the instrument is switched on.
Power ON/OFF switch and pause b utton
A
B
Note: The control for switching on or off is delayed to accept only definite commands.
•
•
Pause/Resume The pause/resume button allows the user to pause and later resume a test run for access
Button on request.
Note: During operation, keep the front access panel closed to have access to the switches.
ATTENTION
Unintended pausing or switching off the instrument.
To avoid unintended actuation, pay attention to the following:
• When opening or closing the front access panel, make sure that the pause button and
PyroTec™ PRO Hardw are User's Manual, V1.2
Pause/resume button
Power ON/OFF switch
For switching on: Keep the power ON/OFF switch pressed for at least 0.5 seconds.
For switching off: Keep the power ON/OFF switch pressed for at least 2 seconds.
C Front access panel, closed
Return to TOC
63
RT-MN024-1.2 02/21